Airtight Sealing Of Windows, Doors, & Corners Internal Use installation to window frames

Internal Use

• Split Release Backing For Quick Installation
• High Performance Airtight Tape
• Water Repelling Carrier
• Acrylic Adhesive With Excellent Ageing Resistance Extremely Stable
• Internal Use For Sealing Windows, Doors And Corners
• Design Life = Lifetime*

Available to order as

More Details

General Information

• Solvent Free
• High Adhesive And High Shear Strength
• Voc Free
• Water Resistant Adhesive
• Outdoor Exposure Up To 3 Months
• For Airtight Sealing According To Part L & Din 4108-7
• Lowest Voc Rating In Hazardous Substance Test
• Diffusion-open carrier
• Stable form thanks to tear-resistant carrier
• Maximum adhesive power already from -5 °C
• Extremely robust and durable
• Can be plastered over
• 4 months of outdoor weathering

Application areas

Partel CONIZO is used to create permanent air tightness seals for membrane overlaps, window and door connections.  It is also suitable for corner connections. 
Adheres to all Partel interior membranes, concrete, plaster, wood, steel, other vapour control layers including PE, PA, PP and aluminium, wood base panels OSB, MDF, plywood.

Application process
Ensure surface is clear from dust, grease, and loose material. The substrate must to be dry and free from frost. Prime surface with Partel ACRAPRIME and allow sufficient time for primer to dry depending on conditions. This will eliminate dust particles and result with a better bond. 
CONIZO SL version—Cut the required length for connection, us the SL (Split Linear) to create an L shape fold with tape and peel 12mm release liner from tape. Apply this 12mm fold to window/door frame. Thereafter peel second linear from tape and with sufficient downward pressure press tape onto substrate to activate acrylic adhesive, use Partel HELPING HAND to apply pressure evenly. For uneven surfaces Partel ACRALINE or ACRABOND may be used. 
CONIZO version—Cut the required length for connection, peel the release liner from tape and with sufficient downward pressure press tape onto substrate to activate acrylic adhesive, use Partel HELPING HAND to apply pressure evenly.

* Adhesion: Before sticking tapes the surface should be clean and dry, water repelling substances are not suitable for adhesion. Use Primers (Acraprime) on porous or masonry surfaces. Adhesion is assured on all Partel membranes, planed timber, painted timber, plastics and metals. The more suitable the surface for adhesion the better the results, Folds, creases or substrate issues impact on the system. It is the responsibility of the applicator to perform adhesion tests prior to proceeding - where required. It is necessary to apply pressure using Partel ‘Helping Hand’ applicator. Tapes are not designed for tensile strains.